© 2022, Building Institute NSW, All right reserved.

Certificate III in Plumbing

Code - CPC32413

Get the training and support needed to gain your plumbing qualification with a Certificate III in Plumbing at Building Institute NSW.

This is an apprenticeship course, designed for those currently employed as plumbing apprentices. It will provide you with the formal trade certificate you need in order to become a registered plumber.

Through classroom learning and work-based tasks, you’ll gain skills and knowledge to complement your on-the-job training.

This qualification provides a trade outcome in plumbing. Occupational titles may include:
• Plumber
• Plumber and drainer
• Plumber and gasfitter
• Gasfitter
• Roof plumber

  • • Not applicable / Nil

• 18 years old and above at the time of enrolment
• Pre-training review
• LLN test

  • For Qualification by RPL the candidate MUST provide the following required documents:
    1. 100 points ID
    2. Unique Student Identifier – USI number
    3. Resume (Relevant Industry)
    4. Reference Letter (Relevant Industry)
    5. Payslip
    6. Work site Photos & Videos evidences

To be awarded this qualification, competency in one of the four occupational options must be achieved.

OPTION 1: General Plumbing 

For the award of the CPC32420 Certificate III in Plumbing (General Plumber) a minimum of 58 units are to be completed as follows: 

  • 43 core units
  • 15 elective units

Electives are to be selected as followed:

  • 8 units from Group A and
  • 4 units from Group B and
  • 3 units from Group C

Up to 4 elective units may be replaced by units from any other group or from any relevant nationally endorsed Training Package or accredited course. The units must contribute to the vocational outcomes of the qualification.

OPTION 2: General Plumbing – Roofing  

For the award of the CPC32420 Certificate III in Plumbing (General Plumber and Roofing) a minimum of 62 units are to be completed as follows: 

  • 43 core units
  • 19 elective units.

Electives are to be selected as followed:

  • 8 units from Group A and
  • 4 units from Group B and
  • 3 units from Group C and
  • 4 units from Group D

Up to 4 elective units may be replaced by units from any other group or from any relevant nationally endorsed Training Package or accredited course. The units must contribute to the vocational outcomes of the qualification.

OPTION 3: General Plumber – Mechanical 

For the award of the CPC32420 Certificate III in Plumbing (General Plumber and Mechanical) a minimum of 73 units are to be completed as follows: 

  • 43 core units
  • 30 electives

Electives are to be selected as followed:

  • 8 units from Group A and
  • 4 units from Group B and
  • 3 units from Group C and
  • 7 units from Group E and
  • 8 units from Group F

Up to 4 elective units may be replaced by units from any other group or from any relevant nationally endorsed Training Package or accredited course. The units must contribute to the vocational outcomes of the qualification.

OPTION 4: General Plumbing – Roofing and Mechanical 

For the award of the  CPC32420 Certificate III in Plumbing (General Plumber Roofing and Mechanical) a minimum of 77   units are to be completed as follows: 

  • 43 core units
  • 34 electives

Electives are to be selected as followed:

  • 8 units from Group A and
  • 4 units from Group B and
  • 3 units from Group C and
  • 4 units from Group D and
  • 7 units from Group E and
  • 8 units from Group F

Up to 4 elective units may be replaced by units from any other group or from any relevant nationally endorsed Training Package or accredited course. The units must contribute to the vocational outcomes of the qualification.

An asterisk (*) against a unit code below indicates that the unit has a prerequisite. Please check the unit for information on this. All prerequisites are packaged in the qualification.

Core Units 

CPCCCM2012*

Work safely at heights

CPCPCM2039

Carry out interactive workplace communication

CPCPCM2040*

Read plans, calculate quantities and mark out materials

CPCPCM2041

Work effectively in the plumbing services sector

CPCPCM2043

Carry out WHS requirements

CPCPCM2045*

Handle and store plumbing materials

CPCPCM2046*

Use plumbing hand and power tools

CPCPCM2047*

Carry out levelling

CPCPCM2048*

Cut and join sheet metal

CPCPCM2054*

Carry out simple concreting and rendering

CPCPCM2055*

Work safely on roofs

CPCPCM3021*

Flash penetrations through roofs and walls

CPCPCM3022*

Weld polymer pipes using fusion method

CPCPCM3023*

Fabricate and install non-ferrous pressure piping

CPCPCM3024*

Prepare simple drawings

CPCPCM3025*

Install trench support

CPCPDR2021*

Locate and clear blockages

CPCPDR2025*

Install stormwater and sub-soil drainage systems and drain work site

CPCPDR2026*

Install prefabricated inspection openings and inspection chambers

CPCPDR3021*

Plan layout and install below ground sanitary drainage systems

CPCPDR3023*

Install on-site domestic wastewater treatment plants and disposal systems

CPCPFS3031*

Fabricate and install fire hydrant and hose reel systems

CPCPGS3048*

Install gas pressure control equipment

CPCPGS3049*

Install gas appliance flues

CPCPGS3051*

Purge consumer piping

CPCPGS3053*

Disconnect and reconnect Type A gas appliances

CPCPGS3054*

Calculate and install natural ventilation for Type A gas appliances

CPCPGS3056*

Size and install consumer gas piping systems

CPCPGS3059*

Install LPG storage of aggregate storage capacity up to 500 litres

CPCPGS3061*

Install and commission Type A gas appliances

CPCPSN3011*

Plan the layout of a residential sanitary plumbing system and fabricate and install sanitary stacks

CPCPSN3022*

Install discharge pipes

CPCPWT3020*

Connect and install storage tanks to a domestic water supply

CPCPWT3021*

Set out and install water services

CPCPWT3022*

Install and commission water heating systems and adjust controls and devices

CPCPWT3025*

Install water pumpsets

CPCPWT3026*

Install and fit off sanitary fixtures, water services and adjust water service controls

CPCPWT3027*

Install backflow prevention devices

CPCPRF2023*

Collect and store roof water

CPCPRF3022*

Fabricate and install roof drainage systems

CPCPRF3023*

Fabricate and install external flashings

CPCPRF3024*

Install roof components

HLTAID011

Provide first aid

  

Electives Units  

Group A 

CPCCCM2008*

Erect and dismantle restricted height scaffolding

CPCCCM3001

Operate elevated work platforms up to 11 metres

CPCPCM2049*

Cut mild steel using oxy-LPG-acetylene equipment

CPCPCM2052*

Weld mild steel using oxy-acetylene equipment

CPCPFS3037*

Install residential life safety sprinkler systems

CPCPFS3038*

Test and maintain fire hydrant and hose reel installations

CPCPIG2021*

Design domestic urban irrigation systems

CPCPIG3021*

Set out, install and commission irrigation systems

CPCPIG3022*

Install and commission domestic irrigation pumps

CPCPWT3024*

Install and maintain domestic water treatment equipment

CPCPWT3028*

Install property service

CPCPWT3029*

Install water pipe systems

CPCPWT3030*

Install home fire sprinkler systems

MEM11011*

Undertake manual handling

MEM13015

Work safely and effectively in manufacturing and engineering

MEM16006*

Organise and communicate information

MEM05049*

Perform routine gas tungsten arc welding

MEM05050*

Perform routine gas metal arc welding

RIIWHS202E

Enter and work in confined spaces

  

Group B 

CPCPCM2053*

Weld using metal arc welding equipment

CPCPGS3046*

Install LPG systems in caravans, mobile homes and mobile workplaces

CPCPGS3052*

Maintain Type A gas appliances

CPCPGS3055*

Install gas sub-meters

CPCPGS3060*

Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8 kl 

CPCPGS3047*

Install LPG systems in marine craft

  

Group C 

CPCPDR3025*

Plan layout and install vacuum drainage systems

CPCPSN3025*

Install pre-treatment facilities

CPCPSN3026*

Install sewerage pumpsets

RIIWHS202E

Enter and work in confined spaces

RIICTT306E

Install cure in-place linings for existing pipeline systems

  

Group D 

CPCCCM2008*

Erect and dismantle restricted height scaffolding

CPCCCM3001

Operate elevated work platforms up to 11 metres

CPCPRF2022*

Select and install roof sheeting and wall cladding

CPCPRF2024*

Fabricate roof coverings for curved structures

CPCPRF3021*

Receive roofing materials

CPCPRF3025*

Install roof coverings to curved roof structures

CPCPRF3026*

Install roof sheets, wall cladding and complex flashings

CPCPRF3027*

Select and install a heritage roof system

  

Group E 

CPCPMS2021*

Assemble mechanical services components

CPCPMS3031*

Fabricate and install steel pressure piping

CPCPMS3032*

Select and fit insulation and sheathing

CPCPMS3035*

Install and test ducting systems

CPCPMS3036*

Install air handling units

CPCPMS3038*

Install air conditioning control equipment

CPCPMS3039*

Maintain mechanical services equipment

  

Group F  

CPCCCM2008*

Erect and dismantle restricted height scaffolding

CPCCCM3001

Operate elevated work platforms up to 11 metres

CPCCWC2001*

Complete penetrations and flashings

CPCCWHS2001

Apply WHS requirements, policies and procedures in the construction industry

CPCPCM2053*

Weld using metal arc welding equipment

CPCPMS3033*

Install small bore heating systems

CPCPMS3034*

Install and test medical gas pipeline systems

CPCPMS3037*

Install and commission a single head split system air conditioning

CPCPMS3040*

Install and maintain evaporative air-cooling systems

CPCPMS3041*

Install domestic solid fuel burning appliances

UEECD0007*

Apply work health and safety regulations, codes and practices in the workplace

UEERA0049*

Install and start up single head split air conditioning and water heating heat pump systems

UEERA0059*

Prepare and connect refrigerant tubing and fittings

UEERA0064*

Recover, pressure test, evacuate, charge and leak test refrigerants – split systems

Assessment methods may include:
• Demonstration/Presentation/ On-Site observation
• Questioning / Written assessment task
• Research assignment / Project / Portfolio
• Role Play/Case Study

This qualification is suitable for an Australian Apprenticeship pathway.

Please contact us directly to discuss your options.

• Sydney

Please contact us directly to discuss your options.

Get More Information About This Course

    Others Qualifications
    Apply Now
    APPLY NOW